AT49F1024 |
RFQ for AT49F1024 Required Field |
 |
| Technical/Catalog Information | AT49F1024-55VC |
| Vendor | Atmel |
| Category | Integrated Circuits (ICs) |
| Memory Type | FLASH |
| Memory Size | 1M (64K x 16) |
| Speed | 55ns |
| Interface | Parallel |
| Package / Case | 40-VSOP |
| Packaging | Tray |
| Voltage - Supply | 4.5 V ~ 5.5 V |
| Operating Temperature | 0°C ~ 70°C |
| Format - Memory | FLASH |
| Drawing Number | * |
| Lead Free Status | Contains Lead |
| RoHS Status | RoHS Non-Compliant |
| Other Names | AT49F1024 55VC AT49F102455VC |
| Product | Manufacturers | Pack | D/C |
| AT49F1024 | Atmel | 04+ | 500 |
The AT49F1024 and the AT49F1025 are 5-volt-only in-system Flash Memories. Their 1 megabit of memory is organized as 65,536 words by 16 bits. Manufactured with Atmel's advanced nonvolatile CMOS technology, the devices offer access times to 45 ns with power dissipation of just 275 mW over the commercial temperature range. When the device is deselected, the CMOS standby current is less than 100 µA. The only difference between the AT49F1024 and the AT49F1025 is the pinout. The AT49F1024 is pin compatable with the AT27C1024, and the AT49F1025 is pin compatable with the AT29C1024.
Features |
| • Single Voltage Operation 5V Read 5V Reprogramming • Fast Read Access Time - 45 ns • Internal Program Control and Timer • 8K word Boot Block With Lockout • Fast Erase Cycle Time - 10 seconds• Word By Word Programming - 10 µs/Word Typical• Hardware Data Protection •DATA Polling For End Of Program Detection • Small 10 x 14 mm VSOP Package• Typical 10,000 Write Cycles |
